长城RDX高温润滑脂
1. 概述
本产品系以有机高分子稠化剂稠化合成油,并加有多种功能添加剂经适当加工工艺而成的高温润滑脂。
2. 性能特点
l 优异的高低温性能,保证使用部位高温下正常运转;
l 良好的润滑性,保护使用部位减少磨损;
l 优异的机械安定性能和胶体安定性,避免润滑脂流失;
l 优异的氧化安定性能性能,防止润滑脂高温变质;
l 优异的防护性,保证使用部位的金属部件免受外界的侵蚀。
3. 执行标准
本产品符合NO.065-98标准。
4. 典型数据
项 目
|
典型数据
|
试验方法
|
1/4工作锥入度,0.1mm
|
68
|
GB/T 269
|
滴点,℃
|
>300
|
GB/T
3498
|
腐蚀(T3铜片,100℃,3h)
|
合格
|
SH/T 0331
|
蒸发度(200℃,1h),%(m/m)
|
0.22
|
SH/T
0337
|
压力分油,%(m/m)
|
8.37
|
GB/T 392
|
5. 用 途
本产品适用于各种工业装置和设备高温下工作的低速和中速重负荷滑动和滚动轴承、链条、齿轮的润滑。
适用温度范围:-40℃~+250℃,短期可达280~300℃。
6. 注意事项
l 使用前,将润滑部位用煤油或其它溶剂清洗干净,晾干或吹干后再加注本产品;
l 启用后,应及时将盖封严,以防混入杂质;
l 请勿与其它油脂混用,以免影响使用效果;
l 本产品在230℃以上使用时,应保持良好的通风环境,并且人员不得在此环境下逗留;
l 本产品应贮存于清洁、干燥及避光处。
7. 包 装
1kg/塑料盒或根据客户需求进行包装。
Aeroshell Fluid 41壳牌41号航空液压油MIL-PRF-5606H CML02-001 12X1QT/CTN
eroShell Fluid 41 is dyed red.
Main Applications
AeroShell Fluid 41 is intended as an hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a "superclean" fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –54°C to 90°C and pressurised between –54°C to 135°C.
AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber.
AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 51, 61 and 71 and SSF/LGF.
Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.
Specifications, Approvals & Recommendations
Approved MIL-PRF-5606H* (both U.S. and European production)
Approved DEF STAN 91-48 Grade Superclean* (European production only)
Meets DEF STAN 91-48 Grade Normal (European production only) Equivalent to DEF STAN 91-48 Grades Superclean* & Normal (U.S. production only)
Approved DCSEA 415/A (French)
Analogue to AMG-10 (Russian)
NATO Code H-515* (equivalent H-520)
Joint Service Designation OM-15* (equivalent OM-18)
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk, or the OEM Approvals website.
Health, Safety & Environment
Health and Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/
|