壳牌航空润滑脂 壳牌航空液压油 壳牌航空发动机油 壳牌航空合成润滑脂
美孚润滑油
壳牌润滑油
BP润滑油
埃索润滑油
道达尔润滑油
嘉实多润滑油
加德士润滑油
克鲁勃润滑油
  热销产品
埃索力图液压油
AeroShell Turbine Oil 308 ...
壳牌佳度S2V220 1润滑脂 原...
壳牌安定来食品级白矿油...
壳牌气动工具油S2 A
壳牌得力士(Tellus)S2M液压...
雪佛龙特级高速轴承润滑脂Gr...
美孚维萝斯锭子油系列...
AeroShell Oil 100 航空活塞...
美孚斯力士冷冻机油 S...
壳牌航空润滑脂特价 壳牌22...
BP安能高HLP—HM液压油...
 
  产品展示
壳牌33航空润滑脂 航空润滑脂33 飞机润滑脂33批发
文章来源:旺弘源    时间:2021-03-26 11:08:39
壳牌33航空润滑脂 航空润滑脂33 飞机润滑脂33批发
符合MIL-PRF-23827C执行标准的AEROSHELL GREASE 33航空润滑脂,是一种多用途的低温航空润滑脂,可用在机身多个部位以及电机、滑动轴承等各个机件上。AEROSHELL GREASE 33的中文名称是壳牌33号航空润滑脂,是从壳牌石油公司原装进口的型号,国内没有代加工厂。
耐低温
低温使用下限为-73℃,低温性能优异
耐腐蚀
防腐配方,防腐防锈,延长零件使用寿命
耐磨损
添加有抗磨添加剂,保护零件不受磨损
通用性强
用于机身各暴露的部位

禁止参合使用,具体使用方式和注意事项请参考壳牌33好的MSDS文件;
储存请注意避风、避光、防火、防潮,并注意润滑脂本身的质保期限。
AeroShell Grease 64 以前被商标为 AeroShell Grease 33MS。为响应客户要求,为避免与 AeroShell Grease 33 混淆,决定将 AeroShell Grease 33MS 重命名为 AeroShell Grease 64。 
 33 增强的抗磨和抗腐蚀性能,并通过添加固体润滑剂而 具有附加的 EP(极压)性能。 有用的工作温度范围是–73° C 至+ 121° C。 注意:应用领域 AeroShell Grease 33 已经确立了自己对大多数机体通用,机体润滑要求的 回应,已被批准用于波音,空中客车和许多其他机型。它以出色的抗腐蚀和 抗磨性能树立了标准,同时使飞机操作员能够减少润滑脂库存并减少错误使 用的风险。然而,在机身上仍然存在少量的高负荷滑动应用,在这些应用中, 总是需要额外增加二硫化钼。为了满足这一需求,壳牌航空开发了 AeroShell 润滑脂 64. AeroShell Grease 64 与上一代共享相同的先进润滑脂技术,还具有二硫 化钼提供的极压(EP)特性。 AeroShell Grease 64 包含合成油,不得与不兼容的密封材料一起使用。 
AeroShell Grease 33 is a synthetic universal airframe grease composed of
a lithium complex thickened synthetic base oil with corrosion and oxidation
inhibitors and load carrying additives.
The useful operating temperature range is –73°C to +121°C.
APPLICATIONS
For many years aircraft operators have been seeking to rationalise the
greases used on aircraft and to reduce the number of different greases in
their inventories. Recently Boeing began research on a new, general
purpose, corrosion-inhibiting grease. The aim was for a non-clay based
grease that would provide longer life for components and mechanisms and
possess improved wear and corrosion resistance. This led to the
introduction of the new Boeing Specification BMS 3-33.
Owing to the wide range of operating temperatures, loads and other
environmental conditions required for various aircraft components, several
different types of grease with different desirable properties are used during
routine lubrication of aircraft components. Boeing, in developing their BMS
3-33 specification, took account of the properties of the different grease
types used on aircraft and wrote a specification for a grease which would
provide improved performance and which could be used in the widest
possible range of grease applications.
AeroShell Grease 33 is approved to BMS 3-33A and offers the improved
performance properties required by this specification.
AeroShell Grease 33 can be used for routine lubrication on Boeing aircraft
where MIL-PRF-23827C or BMS 3-24 is specified. AeroShell Grease 33
can also be used in some applications on Boeing aircraft which require use
of MIL-G-21164. Other applications on Boeing aircraft which require use of
MIL-G-21164 and other greases are being reviewed and in due course
Boeing will issue details of the full range of applications. For the current
status, refer to the latest issue of Boeing Service Letter "BMS 3-33 General
Purpose Aircraft Grease".
AeroShell Grease 33 can be used for routine lubrication in applications
where MIL-PRF-23827C is specified on aircraft manufactured by McDonnell
Douglas, Airbus, BAe Regional Aircraft, Canadair, Lockheed, Embraer,
Fokker and Gulfstream (except for wheel bearings, applications above
121°C and sliding applications requiring molybdenum disulphide).
Other aircraft manufacturers are evaluating AeroShell Grease 33 with the
aim of approving it for use on their aircraft. Operators should regularly
check with these manufacturers for the latest status.
上一个产品:航空润滑脂14原装 壳牌14号航空润滑脂 飞机润滑脂        下一个产品:飞机润滑脂特价 壳牌58号航空润滑脂 航空润滑脂
友情链接:
Copyright 2013-2015 © 深圳市旺弘源科技发展有限公司 All Rights Reserved.    粤ICP备12101688号    深圳网络公司--龙腾盛世提供网络技术支持
地址:深圳市宝安区龙华镇大浪街道58号    电话:18902463137    传真:0755-28104393    邮箱:823003595@qq.com    联系人:李建国 18902463137 胡甜甜 18902463137